Calculate percentages and percentage change

Find a percentage, a share or a percentage change.

Local processing

Set up your calculation

Negative numbers and decimals are accepted. Results use up to 6 decimal places.

Your result

50

25% of 200 = 50

Calculated in your browser. No sign-up needed.

Your inputs stay on this device. No account or file upload needed.

Why does a 25% rise need only a 20% fall to reverse it?

Percentage change uses the starting value as its base. Reversing a change changes that denominator. Distinguish a share, a relative change and a difference in percentage points.

Why +10% and −10% do not cancel out.

The second percentage uses a new starting value. Try your own numbers, then compare the rates needed to get back.

Choose a positive starting value and a rate from 0 to 100%. Decimals are accepted.

  1. Start100
  2. After +10%110
  3. Then −10%99

The final value is 99: -1% from the start.

To undo the increase
Decrease 110 by 9.090909% to return to 100.
To undo the decrease
Increase 90 by 11.111111% to return to 100.

Let r = 10 ÷ 100. Start × (1 + r) × (1 − r) = Start × (1 − r²). Undo an increase with r ÷ (1 + r); undo a decrease with r ÷ (1 − r). Multiply either undo rate by 100 to express it as a percentage.

The +10% step adds 10 to 100. The −10% step subtracts 11 from 110. Both percentages are correct; their bases differ. Displayed numbers are rounded to 6 decimal places; calculations use the unrounded values.

Worked examples

Starting point
100 rises to 125; then 125 falls back to 100.
Result
The rise is +25%; the return is −20%.
Why it happens
25 ÷ 100 × 100 is 25, while −25 ÷ 125 × 100 is −20. Equal absolute changes are not equal relative changes when their bases differ.
Starting point
A rate changes from 20% to 25%. Enter 20 and 25 in percentage-change mode.
Result
A +25% relative change, alongside a difference of 5 percentage points.
Why it happens
Subtracting the two rate values gives points; dividing that difference by the starting rate gives relative change. Specify which measure you report.
Starting point
A part of 1 and a total of 3 in percentage-share mode.
Result
33.333333% displayed.
Why it happens
A repeating decimal cannot be shown in full. The six-decimal display is rounded, rather than an exact representation of the fraction.

Choose for the job

You know a percent and want the corresponding amount.
Use percentage of a number: percent ÷ 100 × amount.
You compare a before value with an after value.
Use percentage change and put the original value first. A zero or negative starting value is outside this tool’s change rule.

Adding successive percentages gives the wrong base

Starting at 100, a 10% rise gives 110; another 10% rise gives 121, not 120. Apply each change to its own starting amount. A rise from zero cannot be expressed by this percentage-change formula.

How these examples are derived

The three modes calculate percent ÷ 100 × number, part ÷ total × 100, or (end − start) ÷ start × 100. Share rejects a zero total; change requires a positive start. Results use floating-point arithmetic and display up to six decimal places.

How to use percentage calculator

Choose the calculation that matches your question. The result includes the calculation so you can see where the percentage comes from.

  1. Select percentage of a number, percentage share or percentage change.
  2. Enter both values, using a decimal point for fractions.
  3. Read the result and calculation, or copy the answer.
TRY THIS EXAMPLE

Three common percentage questions

25% of 200 is 50. A value of 50 is 25% of 200. A change from 80 to 100 is a 25% increase: (100 − 80) ÷ 80 × 100.

Good to know

  • A percentage share cannot use a zero denominator.
  • Percentage change uses a positive starting value. An increase is positive and a decrease is negative.
  • Displayed values are rounded to at most six decimal places. This is a general calculation aid, not an accounting or financial forecasting service.

Common questions

Are percentage change and percentage points the same?

No. A change from 20% to 25% is 5 percentage points. Relative to the starting value of 20, it is a 25% increase.

Why can’t I calculate growth from zero?

The percentage change formula divides by the starting value. Division by zero does not produce a finite percentage, so the tool asks you to choose a positive starting value.